Give Some Love To Your Front Suspension. Fork Spring Preload Adjusters By Burly

1BurlyPreloadadjuster2BurlyPreloadadjuster3BurlyPreloadadjusterOften neglected, front suspension rarely sees any love when it comes to rider setup. Too soft or too firm? There wasn’t much you could do without gutting the forks and replacing many of the internals.

Burly Brand took notice of the Harley factory oversight and created a simple to install and set up preload adjuster.

Designed to replace the OEM fork caps, the machined aluminum adjusters can be installed in well under an hour with basic tools and are available for 39mm and 49mm Sportster and Dyna forks.

The adjusters sit tight against the triple tree to avoid handlebar interference and are available in clear or black anodized finish. MSRP $139.95 for the set. Check out the Burly website or contact your local dealer.

6 Responses to “Give Some Love To Your Front Suspension. Fork Spring Preload Adjusters By Burly”


  1. 1 Buster Sep 10th, 2014 at 9:52 am

    Burly just keeps it coming , good job guys.

  2. 2 Frank Pence Sep 10th, 2014 at 9:59 am

    Clever.

  3. 3 JackS Sep 10th, 2014 at 1:44 pm

    Nice!

  4. 4 Sportster Mike Sep 11th, 2014 at 2:28 am

    Great idea – took me forever to get my progressive springs the way I wanted – water pipe 3 inches, 2 1/2 inches etc….

  5. 5 Blackmax Sep 15th, 2014 at 3:34 pm

    Agree with Buster
    Burly Brand is one of the best ones out there
    Way to Go !!!!

  6. 6 Lilly Bane Sep 15th, 2014 at 4:36 pm

    Speed Merchant did it first, and better.

Comments are currently closed.
Cyril Huze