« New Old Style Speedster. Begging For Dirt Or Grass.
Triumph Motorcycles Fined $2.9 Million for Failure-To-Report Case On Steering Defect »

Turn Cycle

Published by Cyril Huze September 1st, 2015 in Accessories and Editorial.

turncycleMulti-point turns and awkward reversing manoeuvres in your garage can be eliminated with this TurnCycle. This center stand can make your bike walking much easier. Just drive onto the leveling mats, drop the center stand, and push down on the rear to lift the front tire off the ground — you can then easily turn the bike around and forget about reversing the next time you head out. Heavy duty construction, non-slip surfaces. Capacity 1000 lbs (454 kg). Measures less then 1/2” (12.7 mm) thick and 15 3/4” (400mm) diameter. MSRP $184.99. Made in Canada by Turn Cycle.

7 Comments

7 Responses to “Turn Cycle”

Feed for this Entry
  1. 1 George Zuniga Sep 1st, 2015 at 11:51 am

    Useful for boomers who drop their big touring bike in their garage.

  2. 2 Steal Your Face Sep 1st, 2015 at 12:05 pm

    Lame. How many bikes even have center stands these days?

  3. 3 Trike Lady Sep 1st, 2015 at 3:45 pm

    I can see owners of Goldwings interested in this product. Goldwings have center stands and possibly BMWs.

  4. 4 BeemerBob Sep 1st, 2015 at 8:04 pm

    When set up on the disc, bike can be turned 180 degrees in around 10 seconds facing the other way. Bike can stay on disc until your ready to ride again. Larger 20″ diameter disc coming out shortly for large touring bikes and ones with swept back center stands.

  5. 5 BeemerBob Sep 1st, 2015 at 8:36 pm

    Go to Turncycle TV on YouTube and watch a 2015 Honda Goldwing GL1800 spin around on the disc.

  6. 6 rebel Sep 2nd, 2015 at 8:30 am

    “spyn cycle” fits too

  7. 7 Capt. Al Sep 6th, 2015 at 9:47 am

    “Steal Your Face” Lots of Bike have Center Stands. All FL’s have Center Stands.

Comments are currently closed.
Cyril Huze