Muskrat Seat Pan By Fabricator Kevin








I posted several times about the work of Fabricator Kevin. For the garage or shop builder looking to install a solo seat, Kevin proposes this 10 gauge steel laser cut pan. After being formed it is equipped with a built-in nose hinge assembly that utilizes a bearing pivot tube. The hinge plates are stainless steel, so the pan can be powder coated and the hinge polished. The spring mounts are welded onto the pan, and are threaded to allow the springs to be affixed. Pan size is 13" long by 10 1/2" wide. The pan has rivet holes pre-punched to help the job of your upholstery shop. Very reasonably priced at $285.00 (bungs & 3” springs included). By the way, the seat pan is called Muskrat because it’s the name of the bike on which this seat pan was installed for the 1st time. See It HERE


2 Responses to “Muskrat Seat Pan By Fabricator Kevin”

  1. 1 TBear Jul 12th, 2007 at 1:24 pm

    I checked out this seat pan at the Smoke Out last month.
    Damn it’s a quality piece of work!
    His web site is
    He has a bunch of cool custom parts and the prices are really fair.

  2. 2 a 1 cycles Jul 15th, 2007 at 6:56 pm

    great products. quality built products, great guy..its a homerun for anybody who has to deal with him. hes the man.

Comments are currently closed.



Facebook Google+ Twitter