Improved Riser Mount Kit For Easy Internal Wiring

For those who want to run their handlebar cables & electricity internally, here a superb idea that has been improved. A custom handlebar mounting kit to run all your lines (wires, cables & hoses) through the bolts and exit them under the top of any triple tree top plate.

It includes bolts with 5/8″ holes for concealing wires and cables, dampening HD standard bushings, chrome washers, chrome nuts & threaded inserts. You must use 1 1/4″ bars with .095 wall thickness. MSRP: $180.00. At Custom Cycle Control Systems.

4 Responses to “Improved Riser Mount Kit For Easy Internal Wiring”

  1. 1 Shifter Aug 25th, 2010 at 9:00 am

    If it was made for 1″ bars instead of 1 1/4 bars, it would interest a much larger number of people.

  2. 2 tattooeddmike Aug 25th, 2010 at 12:36 pm

    While the first comment I understand as read, the fact 1″ risers would work if you choose to improvise…. fabricate, customize,…. ect. make it work or make your own. Good idea, while not rocket science using the wrong material (soft or brittle material for the bolts) could be scary or deadly should one or both bolts break…. Just my thoughts on a clean mounting for risers, I like it.

  3. 3 jatinder pal Aug 26th, 2010 at 4:56 am

    Looks good.

  4. 4 Wil Oct 13th, 2010 at 12:39 pm

    Or you could just run the wires externally. LA Choppers supplies clamps that replace your OEM hand control ones but have a cut-out for running the wires down and along the bar.

    Here’s a link.

Comments are currently closed.
Cyril Huze