Smasher Series Mid Foot Controls.

Sporty look often implies mid-shift controls. Another option from Top Shelf Customs is these Smasher Mid Controls available to work with major brands of open primary systems: BDL, Primo-Rivera and Ultima.

They are available in polished ($729.00) or black anodizing ($799.00). Order at 714-903-8042 Top Shelf Customs.

Zipper's

13 Responses to “Smasher Series Mid Foot Controls.”


  1. 1 Adam Mar 22nd, 2011 at 9:46 am

    Looking good. No chrome version?

  2. 2 Cantrell Mar 22nd, 2011 at 3:08 pm

    How much?

    Cantrell

  3. 3 Dan Mar 22nd, 2011 at 3:11 pm

    Hey Cantrell. Don’t know how to read? Prices are in the article!

  4. 4 chopperfreak29 Mar 22nd, 2011 at 3:44 pm

    Hey Dan I think Cantrell might have been repeating the price in astonishment like I did.LOL

  5. 5 Cantrell Mar 22nd, 2011 at 5:36 pm

    chopperfreak29,

    You would be correct and I am still rollin’ that number through my head.

    Cantrell

  6. 6 Jill & Gerry Haas Mar 22nd, 2011 at 9:50 pm

    Simple. Like them. Expensive. Made where?

  7. 7 Willy Rebel Mar 23rd, 2011 at 9:28 am

    Think those have been around a bit from a different manufacturer so Top Shelf is probably just licensing them. Nicely made, simple concept, but you can get a full set of mid controls with master cylinder for about the same price.

    I know the material and machine work on those is probably not more than $125, so somebody’s asking a bit much.

  8. 8 Joey C. Mar 23rd, 2011 at 9:32 am

    Willy Rebel. Evidently you have no clue of aluminum cost, machining and assembling. Can you make a set for me for $125? LOL

  9. 9 Barry Mar 24th, 2011 at 1:41 am

    Thanks for your support, Cyril, we really appreciate it. And, thanks to all of you who took the time check us out. Top Shelf Customs Smasher Series Mid Controls are an original Top Shelf Customs product and like all Top Shelf Customs motorcycle parts, are machined from the finest materials available, right here in the USA. .
    I work for Top Shelf and, I know it’s my job to tell you that we make the cleanest and highest quality mid control available. But, that’s also exactaly what our customer that have them tell us.
    If you like our mid control, or, just like to support american companies and jobs, you may also like some of our other outstanding american made motorcycle parts. You can check out our entire line at http://www.topshelfcustoms.com or call 714-903-8042 for our new 2011 parts catalog. Thanks again,

    B

  10. 10 Will Rebel Mar 24th, 2011 at 11:12 am

    Joey C,
    Apparently YOU have no idea of the cost of machining parts. In production quantities of 25-50 sets, these can be done for less than $95. The materials on this set are about $25. Polish and chrome runs another $25-30 AFTER the machine and material cost.
    Can I do these for $125? All day long as a manufacturer! Yes, there should be some markup because everybody needs to eat, but starting from the real cost and going up, there is a lot of difference…

    Since you’re so knowledgable, I’m sure you realize that a $730 retail price drops to a $510 dealer price, then to a $330 distributor price, which puts these at over a $200 markup on the bottom end, or a 60%+ margin when industry standard is 35-40%. So because these start at a manufacturer’s price of over $200 markup instead of approximately a $75 markup, the end user gets nailed all the way up the line.

    So, no disrespect to Top Shelf, because these are a pretty product, but I have a set of these 99% the same if they’re not Top Shelf’s, that I got from Von Dutch Kustoms when they were around, and have been sitting in a box for 5 years…so definitely not “new”.

    Regardless, there is no substitute for American quality and supporting an American company, but the price is a bit high.

  11. 11 jatinder pal Mar 28th, 2011 at 8:33 am

    Simple and clean……good looking controls.Totally agree with joey and barry from top shelf customs.

  12. 12 TPJ Customs Mar 28th, 2011 at 10:10 am

    They are sweet looking Barry. There are always gonna be haters and complainers. As some people above show. The guys at top shelf don’t need to copy anyone they are building sweet machines that are way cooler than most. And high quality pieces. Good shit ain’t cheap and cheap shit ain’t good. Keep it up and don’t let the verbal diarrhea from some get you down. They just can’t produce that’s why they type.

  13. 13 Missy May 10th, 2011 at 7:20 am

    AKAIK you’ve got the asnewr in one!

Comments are currently closed.
Crusher
S&S
S&S
Barnett
S&S

Subscribe

Socialize

Facebook Google+ Twitter