How To Turn A DNA Springer Front End Into A Much Better Looking One

DNA sold a lot of its foreign made Springers to builders on a budget. But who likes the quite ugly square front section of this front end? A giant eye sore on any cool chopper… So, JC and Jimmie Lee Coen at Three Two Choppers got a very good idea. To offer a Wishbone Spring Tube Kit guaranteed to fit on the DNA Springer and making it look like a high end end model, still for a very reasonable budget.

This is a bolt-on kit made to any length between -4 and +10 like the Springers lengths offered by DNA. (By the way, the kit will also work on Paughco springers too. They measure a bit different so a measurement from your Paughco will be needed.) They are guaranteed to fit, are 100% TIG welded and all parts are CNC machined for the highest quality.

Wishbone Spring Tube Kit includes the wishbone spring tubes, 2 stainless steel spring rods, 2 chrome spring keepers. You can reuse your existing hardware. Doing the conversion makes your bike look much better and helps support an American company. Putting a little bit of USA back into a foreign DNA SPringer will cost you only $219 plus S/H for a Raw Kit. Chrome + $115) and Powder Coating ($40 for black) are also available. Shock mount can also be added. Three Two Choppers.

Zipper's Kits For New Bikes

19 Responses to “How To Turn A DNA Springer Front End Into A Much Better Looking One”


  1. 1 Ray Dec 19th, 2012 at 4:36 pm

    And now DNA is going to copy it!

  2. 2 Bill Dec 19th, 2012 at 5:20 pm

    Nice work Three Two. Looks great.

  3. 3 Mutiny Dec 19th, 2012 at 5:41 pm

    Great guys, awesome company, impressive machines looking forward to their success!!!!

    Mutiny!

  4. 4 Jim Dec 19th, 2012 at 10:47 pm

    Always something cool from the boys at Three Two.

  5. 5 Steve Carr Dec 19th, 2012 at 11:43 pm

    I like it alot, and will use iron my next build

    Steve Carr

  6. 6 Flying Piston Dec 20th, 2012 at 12:58 am

    Lotta cool stuff coming out of the doors of 32. Definitely a shop to keep on your radar.

  7. 7 Sheriff Dec 20th, 2012 at 9:04 am

    DNA made in CHINA

  8. 8 Calif Phil Dec 20th, 2012 at 10:27 am

    It does look like a nice product. I make DNA springers look better by closing their catalog and ordering a Paughco springer.

  9. 9 Calif Phil Dec 20th, 2012 at 10:29 am

    That looks like a nice product. If I want to make a DNA springer look better I close their catalog and place an order for a Paughco Springer.

  10. 10 industry guy Dec 20th, 2012 at 7:11 pm

    very good idea. nice style.

    unfortunately DNA = very soft metal = chinese junk.

    you couldn’t pay me to ride a bike on the pavement with ANY of their critical products. (wheels, swingarms, forks, brakes, etc..)

    Three two choppers should make one for the paugho springer instead.

  11. 11 Mcfreeak Dec 20th, 2012 at 7:39 pm

    DNA sprinters don’t have bushings in the rocker. Just metal to metal Chinese junk

  12. 12 Josh Dec 20th, 2012 at 11:59 pm

    huge improvement aesthetically, but those things always fail in the rear legs. And by fail, I mean break the f%$k in half. Seen it in person. Junk chinese pot metal. And I’d be worried about the liability of modifying an already flawed product. Just my .02

  13. 13 Shaz Dec 24th, 2012 at 10:20 am

    So much better than the stock cheap-o DNA square look.

    Three Two rocks!!!! Nice work !

  14. 14 simonnormandin@hotmail.com Dec 24th, 2012 at 10:32 am

    if you buy one of those i can tell you it will be your last springer front end. just good for clowns in the bike shows

  15. 15 road rash Dec 24th, 2012 at 12:03 pm

    All I can say about that is its really cool but it wont be long before DNA starts offering your design to the public… trust me on this one bro they like to steel other peoples designs and throw a pattern on them hope u have one on yours other wise your idea will be in their catalog …. just a heads up

  16. 16 road rash Dec 24th, 2012 at 12:05 pm

    This will be made in China now that you’ve posted it by DNA

  17. 17 Ron Dec 24th, 2012 at 3:28 pm

    Would never buy DNA springer in the first place.

  18. 18 dandasman Mar 1st, 2013 at 11:06 am

    what a bunch of dick heads. the Article is about a product for those who decide or have decided to buy a DNA and wish to make it look different than everyone else…and it does, just look at it..
    If you don’t want a DNA then good for you, but they have sold thousands of them and it looks like these guys are capitalizing on this. If DNA steals the idea then we back the US made product…pretty simple..
    if you want to buy a Paugcho then spend the coin, and then contact 3/2 b/c looking at their website shows they fit Paugcho Springers too..and if thats not your style well, it looks like they are building a different springer as well and then by all means you won’t look like an ass clown at the show… whatever the eff that means?

    -Dasman

  19. 19 Gerry Hetherington May 10th, 2013 at 3:53 am

    Hey Guy’s, do you ship to Australia? If so any idea of the cost?

Comments are currently closed.
S&S

Subscribe

Socialize

Facebook Google+ Twitter
Trade In Your iPhone