Private Label Handlebar Manufacturing Program

motorcyclebarsRockabilly Jay (Jay Skwarlo) , formally of West Coast Choppers, is now offering Private Label Motorcycle Handlebar Manufacturing. Any bars with any bend, either wide, narrow, high, low, 1″ or 7/8″ OD, welded on risers options. Just tell him your specifications and he will deliver in quantities as low as 50 pieces. If you do not have a drawing he can work off a sample or even draw it for you.

His company is equipped with state-of-the-art CNC bending machines, offers roll-marking. Fast turnaround time. Past clients include 70 Moto, West Coast Choppers, Hog Killers and Lossa Engineering. Contact Jay on my behalf at Tel: 714.835.3400 Ext.236 or Fax: 714.835.5020 or at

8 Responses to “Private Label Handlebar Manufacturing Program”

  1. 1 Joel Reyner Jan 9th, 2013 at 10:25 am

    Behind all the bars you see, very few true manufacturers to produce them.

  2. 2 Kirk Perry Jan 9th, 2013 at 11:14 am

    The ’54-74 roll-threaded ends on Harley bars are a separate piece (56090-53) that includes a roll-stop for the throttle, the machined slot for the two stacked roller wheels and the flat-pitched threading internally.

    Adding these end pieces will allow internal throttle cables which clean the look up considerably, and prevent hooking someone’s automobile side mirror with an external throttle cable when your lane-splitting during stalled traffic.

  3. 3 CafeSportyTC Jan 9th, 2013 at 11:16 am

    I grew up with S&M BMX products, there solid, great Bars, Stems frames and forks… a great company, clean welds… cant beat them, im sure they will offer the same quality for motorcycles!

  4. 4 Broadway lee Jan 10th, 2013 at 7:56 am

    Right on good luck jay yer old bike is still one of my favorite ever

  5. 5 Elvis Nixon Jan 10th, 2013 at 8:20 pm

    Good Luck Jay! Old BMX’er done good…

  6. 6 Josh Jan 13th, 2013 at 2:45 am

    ran S&M bmx bars my whole life… the best in the business. this kicks ass!!

  7. 7 DEREK Jan 13th, 2013 at 11:25 am

    S&M had top of the line bmx products growing up, this will be great for the industry.

  8. 8 CafeSportyTC Jan 14th, 2013 at 3:47 pm

    need to dig up my old pair of Chrome Slam bars…. Polished Redneck, and Pitchforks… it might be time for a BMX revival… some good Mid-school action! lol

Comments are currently closed.
Cyril Huze