Always with the objective of improving your stock Harley driveline setup, BAKER Drivetrain releases the Cruiser Drive Shift Kit, a new product to help your transmission shift smoother and as silently as possible.
You know about the loud klunk noise when you shift, experienced the skipping gear or the neutral that you can’t find when you need it the most.
The new BAKER Cruise Drive Smooth Shift Kit installs into all stock Cruise Drive bikes Dyna 2006- up and Touring 2007-up. The products features:
• Easier to find neutral – Redundant neutral feature, and improved ratchet pawl geometry assist the rider in finding neutral the first time, every time.
• Smoother, more positive shifting – Smoother, positive shifting is achieved by incorporating advanced geometry in the fork pin groves, and the integration of a linear detent bearing on the right side mounting plate.
• Reduced shift effort – The fixed spindle drum design offers lower friction as the drum rotates, reducing the effort required by the rider to complete a shift.
• Less shift clunk. Each design improvement combines in a precise mechanical choreography that is inherently silent.
• Prevents mis-shifts The ratchet pawl design incorporates an anti-overshift feature for both up and downshifts that prevent the rider from skipping over a gear.
• Easy Installation – There is no need to disassemble the stock gearset from the bearing door. Just pull out the stock gearset, and swap out the stock shift drum and pawl for the BAKER Smooth Shift Kit Drum & Ratchet Pawl
• No adjustments needed for the ratchet pawl or shift drum, direct bolt in design. Re-uses stock pawl centering pin, shift forks and fork rods.
•High Durability – Machined splines on the pawl to transmission lever provide less chance of stripping. Precision TIG welded shaft to ratchet pawl body combined with improved mechanical press fit design increase long term durability.
• 2 yr, 24,000 mile warranty
The BAKER Cruise Drive Smooth Shift Kit (PN 602-CD6) is available now for purchase for the Retail price of $399. At BAKER Drivetrain or call (877) 640-2004 for any further questions.
Burt does it again…
Or you can just use Redline Heavy Duty Shockproof in your transmission.
Very nice! Will do much more than any oil in my opinion.
Not finding it on their website.
Because it’s brand new, I guess.