Easy To Build Custom Chopper Chassis

This nice chopper chassis is a collaboration between well known frame manufacturer Kraft/Tech and manufacturer/distributor Kustomwerks. Conceived to offer a simple and affordable solution to those who want to assemble a nice rigid bike without to worry about custom fabrication and fitment.

For example, don’t fear about this cool Kustomwerks Torpedo gas tank. Offered in 2 versions, each will bolt right away on the backbone of this Kraft/tech frame. same for the oil tank, rear fender and fender brace, etc. The frame configuration as featured here is for Harley stock rear tire width (if you wish re-use some of your factory parts), is made out of 1 1/4″ DOM steel tubing, neck positioned at an easy to handle 30-degree rake, with a 3″ back bone stretch and a 2″ up in the front legs. There is also a 180mm rear tire version of this frame   where you can use if you wish some of your 1986-2003 Harley Sportster parts. Chassis and all parts sold via Kustomwerks. Call Don Hannon at 800-498-4711 or 336-996-8690

6 Responses to “Easy To Build Custom Chopper Chassis”

  1. 1 Kirk Perry May 25th, 2010 at 7:55 am

    Excellent idea.

  2. 2 Heavy Metal May 25th, 2010 at 10:29 am

    Hard to beat Kraft/Tech frames. I have used two of them recently that didn’t even need shimming on the engine mount. All of their parts I have bought are very high quality for mass produced.

  3. 3 Kirk Perry May 25th, 2010 at 10:42 am

    I’m sure Kustomwerks can relate. We’re all “kit” addicts. Kit people.

    So, welcome to Repop Hell
    We took a dip for a week, then rebound with this message (never mind the guys pulling the levers behind the curtain). 🙂
    And rebounded this week with:
    • “They said the 38-1042 tanks (w/pop-up reserve) we will ship UPS in approximately 6 weeks. *Also, keep the 51-53 emblem mounts for future testing”. Thank you.
    Best Regards,
    V-Twin Mfg.
    We’ll probably see Kustomwerks at market some day. Maybe they’ll build a machine on U-Tube.
    We’re building a ’57 rolling chassis for sale on the tube.
    Kits sales are going to skyrocket in the 48 states this year, imo.
    People want stripped down, cheap, and looking like something you could get killed on.

  4. 4 LENNY May 25th, 2010 at 2:08 pm

    Sold many frame kits from kustom werks Nice parts never a problem

  5. 5 Gerry May 25th, 2010 at 3:03 pm

    Nice classic chopper shape. How much? Can’t fnd it on the website.

  6. 6 jatinder pal May 27th, 2010 at 3:02 am

    Not my taste….if they are coming out with a kit now,they better look at the design side.

Comments are currently closed.
Cyril Huze