Burly Brand Custom Bars For Harley Baggers. Chrome Or Black.

burly1burly2Long trips can’t be pleasure rides without a comfortable riding position. And you know that both factory seat and bars may be a challenge for many riders. Regarding custom bars, and although there is no “average” rider, looks like the most sought after geometry is height 13”, width 38.25”, pullback 5.5”.

These 1.25” OD, center width 11.5” chrome or black (Fly By Wire available) Burly Bagger Bars are perfect for full fairing touring motorcycles. Slotted and drilled for easy internal wiring. May require longer cables and extension of handlebar wiring. And of course Burly offers cable kits to do it right. At Burly Brand.

3 Responses to “Burly Brand Custom Bars For Harley Baggers. Chrome Or Black.”

  1. 1 Kurt Jun 27th, 2014 at 11:55 am

    Black bars?

  2. 2 Doc Robinson Jun 27th, 2014 at 6:00 pm

    Combining their style, with the cable and wiring kits, and what we have is a well thought out product. Not having to chase around for extended brake lines, an extended clutch cable and appropriate wiring cuts down significantly on installation labor costs whether fitted in a shop or a home garage. Well done Burly.

  3. 3 Zyon Jun 28th, 2014 at 7:52 am

    I got a set of Burly 16″ gorilla apes last year along with the cable kit and it made the install a lot easier. I did opt for Harley’s cable extensions because I thought it would be easier but the control end connector would not fit into the holes on the handlebars so I still ended up chopping and soldering the wires.

    I went with the 18″ wire/cable kit since I was keeping my 4.5″ risers and it worked out great. Burly measures their cable kits against a 2″ riser so if you are buying, keep that in mind.

    All they need to do is add the transmission cover gasket, derby gasket and urethane bushings and their kit would be a one stop shop for all things apes.

Comments are currently closed.
Cyril Huze