Barnett Low Profile Lock-Up Pressure Plate 1998-16 HD Big Twins

4Barnett_Lock-up_PP_618-30-23098-Hi-ResThe Barnett “Low Profile” Lock-up Pressure Plate for 1998-15 Harley Davidson Big Twins (except 2013-16 CVO/SE & 2015-16 FLHTC L) is specifically designed to fit under stock or aftermarket primary and derby covers and increases the capacity of your stock clutch while keeping lever effort to a minimum, even with big inch motors!

It’s done by using stainless steel weighted arms that progressively increase pressure to the clutch as RPM’s increase. Three different sets of six coil springs (light, medium, heavy) are included for a variety of spring pressure options. The coil spring design also provides smoother shifting and a more linear engagement compared to a diaphragm type spring.

Installation is bolt on with no modifications required. Whether you’re looking for a lighter clutch effort for a stock Big Twin or serious no-slip performance for a big inch motor, the Barnett Low Profile Lock-up Pressure Plate has got you covered all in one attractive, precision machined unit! Cable actuated (Part #618-30-23098) and hydraulic (Part #618-30-330980 versions are available. MSRP $475.00. Made in the USA. At your local dealer or order online at Barnett Clutches.

Zipper's

4 Responses to “Barnett Low Profile Lock-Up Pressure Plate 1998-16 HD Big Twins”


  1. 1 Rogue Jun 5th, 2016 at 6:33 am

    I had the opportunity to check one of these out first hand and found it to be a excellent product.
    I have been using Barnett products for a Very Long Time and have always found them to be of superior quality.
    I currently have a Barnett Clutch assembly in my motorcycle

  2. 2 Doc Robinson Jun 5th, 2016 at 6:45 am

    I’m with Rougue on both counts!

  3. 3 coma Jun 6th, 2016 at 10:40 am

    So slipping clutches are a common phenomenon with the OEM?

  4. 4 Blackmax Jun 6th, 2016 at 4:40 pm

    Agree with both Doc & Rogue !
    Clutch and assemblies plus cables,
    none are better than Barnett !!!
    Put a clutch pack in my bike over 3 yrs ago
    normally I’d have burned thru a set of clutch plates long before now
    They just keep working & that’s the best you can say about any product

Comments are currently closed.
S&S
S&S
S&S
S&S
S&S
Barnett
Affliction Holdings, LLC

Socialize

Facebook Google+ Twitter