Starving For More Twin Cam Horsepower And Torque?

You are all (almost) looking for more torque!  Torque and more torque for your twin cam engine is easy with the new Knight Prowler TW 777 cam. This cam sets a new standard for peak performance in horsepower and torque for 07 thru 2012, stock Twin Cam engines using the stock heads.  Bob Wood, founder of the legendary Knight Prowler Cams now brings you a new straight bolt in camshaft for your 2007 through 2012; ,103,106,107 and 110SE engines.

Using your stock heads, the Knight Prowler TW 777 cam gives you a great combination of high horsepower and high torque. The TW 777 cam is like the 555 with added extra steroids.  The new Knight Prowler TW 777 cam is in stock and ready for immediate delivery through Bob Wood at 1-205–525-4949 or directly from any of the 1200-plus American and International dealers. To see the Knight Prowler TW 777’s specifications, Dyno runs, and the full range of Bob Wood’s products, log on to Wood Performance 

9 Responses to “Starving For More Twin Cam Horsepower And Torque?”


  1. 1 Scotty Feb 21st, 2012 at 11:05 am

    How much, parts & labor?

  2. 2 1550tc Feb 21st, 2012 at 11:57 am

    Scotty, call Bob for a dealer in our area,

    or try Jamie at. http://www.fuelmotousa.com/

    If your in the Midwest

  3. 3 Richard Feb 21st, 2012 at 1:28 pm

    As an example, it would be informative as to how much increase in torque and HP. over stock, would be achieved on a stock 96″ engine. Also, is re-tuning required?

  4. 4 rob Feb 21st, 2012 at 4:19 pm

    Woods makes great cams…………….but you won’t see the full potential without some headwork and a bump in compression.

  5. 5 Rogue Feb 22nd, 2012 at 7:56 am

    I have used Bobby’s cams in the past and have been very happy with them.

  6. 6 Moore Sensible Products Feb 22nd, 2012 at 8:57 am

    We’re also big fans of Bobby Wood’s stuff. A good guy to talk to and deal with as well.

  7. 7 motorcycle medic Feb 23rd, 2012 at 12:06 pm

    the only cams used in my shop for years now!
    ahead of the time …and a super great guy!
    Kev

  8. 8 Motorcycle Fairings Feb 28th, 2012 at 2:07 am

    The things are quite impressive. It has been seen that everyone wants more torque and more power in this contemporary world of motorbikes. I think the steps you have provided are really useful for me itself. Thanks for sharing it.

  9. 9 Steve May 24th, 2012 at 4:18 pm

    Just had this done to my 2011 CVO Roadglide:

    Woods 777 Camshaft
    Timken cam bearing upgrade
    Vance & Hines H.O. 2 into 1
    Dyno Tuned

    $2100.00
    Huge smile on my face when I roll the throttle…. PRICELESS

Comments are currently closed.
Cyril Huze