Dakota Digital Information System For Harley Sportster, Softail And Dyna Models

Installation is a snap! The new Dakota MCL-3212 digital information system plugs directly into the stock wiring with no modifications needed. It replaces 2011-up Softail and 2012-up Dyna models with 3-3/8” or 4” bar mount and tank mount applications.

Features include an adjustable speedometer (selectable as MPH or KM/h), adjustable tachometer that can also be displayed in the digital readout, fuel range to empty, clock, odometer with two resettable trip meters, engine cylinder head temperature, check engine indicator, security, low fuel, voltmeter reading with low voltage warning, resettable service miles, resettable hour meter, high speed recall, high rpm recall, user settable countdown service meter with warning, 0-60 mph timer, ¼ mile timer, ¼ mile speed, gear position display compatible with 3 speed through 7 speed transmissions, and adjustable rpm warning point with output for external shift light. Don’t tell me you need to know more!

Displays self dim at night for convenience. Odometer is user settable at installation to match vehicle mileage. 4 Versions. 1- High brightness BLUE LED gauge with CHROME bezel. 2- High brightness BLUE LED gauge with BLACK bezel. 3- High brightness RED LED gauge with BLACK bezel. 4- High brightness RED LED gauge with CHROME bezel. Retail for $399.95 and are covered by a 24 month warranty against manufacturer defects. No additional parts needed! More info and catalog at 1-800-852-3228 or your local dealer or visit Dakota Digital.

9 Responses to “Dakota Digital Information System For Harley Sportster, Softail And Dyna Models”


  1. 1 Patrick May 16th, 2012 at 12:33 pm

    Nothing for an 06 Street Bob? Anyone know where to go?

  2. 2 Gunslinger May 16th, 2012 at 2:09 pm

    @Patrick
    http://www.dragspecialties.com/products/?lfr=product%2F51677%2Fpart%2F22100146

    — Not 100% exactly the same, but very similar. Fits 04-12 Dyna’s

  3. 3 Patrick May 16th, 2012 at 3:17 pm

    @Gunsling…thanks for the tip!

  4. 4 Gunslinger May 16th, 2012 at 3:42 pm

    @Patrick

    No problem 🙂

    And I think actually it is going to fit 04-11 Dyna – since the 12 got the new wiring – but should be perfect for your 06 Street Bob!

  5. 5 Mike May 16th, 2012 at 5:38 pm

    Pretty sure the Drag Specialties unit is in fact from Dakota Digital as per this link and fit’s 04-11 Dyna’s

    http://www.dakotadigital.com/index.cfm/page/ptype=product/product_id=684/category_id=522/home_id=-1/mode=prod/prd684.htm

  6. 6 a63strat May 16th, 2012 at 8:19 pm

    I installed one on my 2011 FXDB and it works great! Really like being able to monitor speed and rpms at the same time. Very easy install.

    Recommendation: Make sure you write down your odometer reading before you take your old speedo out.

  7. 7 CafeSportyTC May 17th, 2012 at 12:00 pm

    looks confusing….give me back my analog gauge….

  8. 8 ValueTeck Enterprises May 20th, 2012 at 10:28 am

    Been a dealer now for a while and the quality and customer service is unmatched!
    Hit me up if you want a quote. Any make/model.

  9. 9 Kevin Boyle Kustoms May 21st, 2012 at 11:43 am

    already in use at my shop!
    nice products

Comments are currently closed.
Cyril Huze