Archive for the 'Electrical' Category

Power Management With A Solid State Module. The PDM60.

A Norwalk, Iowa company, Rowe Electronics, has released their PDM60 product, and it has just completed its one million cycle testing. The PDM60 is a product that makes the old methods of power distribution and circuit protection look like stone age solutions. Think of the unit as a fully digital fuse box/panel…. only there are […]

Zipper's

Dakota Digital Introduces A New electronic Speedometer Recalibration Unit For Harleys

The  Dakota Digital SIM-1A is the latest offering in a long line of speedometer recalibration modules, and features improved resolution and accuracy of the speed signal, as well as expanded adjustment capabilities. The range of correction has been increased, now able to adjust the speed signal up 4x and reduce x.25. A direct plug in […]

Spectro Oils

New Harley-Davidson Boom! Audio Stage II Fairing Speakers for 2014-Later Touring Models

The new Boom!™ Audio Stage II Fairing Speaker Kit (P/N 76000524, $329.95) from Harley-Davidson® Genuine Motor Parts and Accessories is backed by a 300 watt amplifier (sold separately) to deliver thumping bass response, sizzling vocals and clean, distortion-free performance at all volume levels. Designed to work seamlessly with the factory-installed Boom! Box infotainment unit on […]

Progressive Suspension

Get Plugged. Harley-Davidson 12-Volt Solution For plugging In A Phone Or GPS.

Plug in and get connected with a Handlebar Mount Auxiliary Power Port (P/N 69200971 Chrome, P/N 69200970 Black; $89.95) from Harley-Davidson® Genuine Motor Parts and Accessories. Use this handy 12-volt port to charge and power a cell phone, GPS, portable music player or tire inflator. The durable and attractive cast housing features a conventional-style power […]

Bates Style Chrome LED Taillights

If you are very lucky, you can find an original Bates light in a swap meet. Probably in very bad shape and at a quite high price. Or you can buy this Bates style taillight featuring either a chrome or black housing and the modern LED lights inside for increased visibility. These LED’s are dual […]

New Badlands Lightning Modules By NAMZ For 2014-Up Harley And Victory Models.

Since NAMZ Custom Cycle Products Inc. purchased Badlands Motorcycle Products Inc., (before the acquisition, NAMZ already designed and manufactured all Badlands wiring harnesses), the crew has been busy at at creating new lightning modules for 2014-up models for Harley and Victory motorcycles. For Harley. On the left, the new 100% Plug-n-Play IHL-04 Badlands module. This […]

Motorcycle Parts Website

Ken’s Factory Popular Neo-Fusion 5-3/4” headlight Now Available in The USA.

Ken Nagal, the Japanese Custom Builder with offices both in his native country and in California, is making his “Neo-Fusion” 5 3/4” headlight available to US buyers. You have already seen it on several recent customs built by Nagal that I have featured in this website. It is designed to be bolt-on on most Harley […]

New Chopper Or Bobber Style LED Headlight

This new CNC machined billet 6061-T6 aerospace grade aluminum LED chopper/bobber headlight features 3 LED lights behind the 2.5″ lens, that put out 2100 lumens. It offers Hi/Low beam capability and comes with a completely contained heat sink to remove any extra heat that these lights might put out. There is also a choice of […]

Harley-Davidson Burst Collection Trim Rings for Headlamp And Auxiliary Lamps

Nail the last detail in a Dark Custom effort with the new Burst Collection Lamp Trim Rings from Harley-Davidson® Genuine Motor Parts & Accessories. Both the Burst Headlamp Trim Ring  (P/N 61400149, $139.95) and the Burst Auxiliary Lamp Trim Rings (P/N 61400255, $199.95) feature a rich, black anodized finish that is machined to expose highlights of […]

The Many Mini LED Light Options For Baggers By Eddie Trotta

If you hate your Bagger’s bulky lights flashing like a Christmas tree, you may like these front and rear LED’s low profile light options offered by Eddie Trotta at Thunder Cycle. For Harley Davidson Road King, Street Glide, and Ultra Glide models, you can replace the front stock giant signal lights with Eddie Trotta’s “Turn […]

Handlebar Switch Wiring Harness To Run High Bars On 2014-Up Harley Baggers

After looking at the 2014 Bagger models, custom electric components company NAMZ realized that even with the new smaller sized 4-position handlebar switch connections, there should be an easier way to fish switch wiring through the bars, especially if you equip your Bagger with tall handlebars. Their brand new, NHCX-CB14 CAN/Bus Handlebar Switch Wiring Harness […]

New Daymaker LED Headlamps For The Harley-Davidson Dyna Fat Bob Model.

The Harley-Davidson Dyna Fat Bob FXDF has a very distinctive look with its Twin-Lamp system. And now you can replace it with a brilliant Fat Bob Daymaker LED Lamps Kit (P/N 67700260 Chrome, P/N 67700261 Black; $799.95) designed expressly for the Fat Bob motorcycle dual headlamp housing. This kit includes separate left and right lamps that […]

Only $19.99 For A Set Of Performance Spark Plug Wires Made In The USA.

Worth mentioning. 100% made in the USA great performance spark plug wires a working man can afford at only $19.99 for a set. Developed by Sumax with Taylor, the Streethunder Wires feature a low resistance conductor that is wrapped in durable silicone double layer jacketing for heat protection, strength and durability.

New Küryakyn™ L.E.D. Saddlebag Extensions For Harley-Davidson Touring Models 2014-Up Models

Ready to get the low profile of stretched saddlebags? At a fraction of the cost you can opt for these Küryakyn extensions with the benefit of wraparound auxiliary Run-Turn-Brake L.E.D. lighting for increased visibility. The injection-molded ABS housings measure approximately 24” long x 5” high and feature stainless steel heat shielding for protection from high […]

Küryakyn L.E.D. Inserts for Saddlebag Supports

A very popular modification on Harley-Davidson Touring Models is to fill the gap between the rear fender and saddlebags. Küryakyn now carries all-new L.E.D. Inserts for Saddlebag Supports available through dealers and distributors worldwide. They are specifically designed to fill the rear-facing openings in the cast saddlebag support brackets on 2014-later Harley-Davidson FLHTCU/L, FLHTK/L, FLHR, […]

New And Interesting. ThunderMax Launching TracMax, An ABS Correction Module For Harley Tourers With Tall Front Wheels 21″ And Above.

ThunderMax will debut at the 2015 Cincinnati V-Twin Expo (February 7-8) the all new TracMax ABS Correction Module for 2014-2015 Harley Davidson Touring Models equipped with tall aftermarket front wheels. When you install taller custom wheels – 21″ and above – than Harley factory front wheels, the linked Anti-Lock Braking System (ABS) on 2014 & […]

Knock Out The Night With The New Harley-Davidson Daymaker Reflector LED Fog Lamp

These 2.5-inch, bullet-shaped reflector-optics LED fog lamps (P/N 68000090 Chrome, P/N 68000092 Gloss Black; $399.95) mount to the engine guard and produce a pool of bright light that fills the dark area between the motorcycle and the low-beam headlamp pattern. The fog lamps project a smooth light pattern without distracting hot spots. The natural daylight […]

Mini Bolt-On Turn Signals With Powerful LED Lights

We all want turn signals as small and as visible as possible when they are used. And the possibility to install them wherever we want without altering the aesthetics of our bikes. These ones are discreet, clean looking, and can be bolted on your forks, or fender struts or … without spacers or adapters necessary. […]

S&S Cycle Hi-4N Ignition. Now Available.

S&S Cycle is ending it’s relationship with the Crane Cams brand effective midnight December 31st 2014, but that doesn’t mean that you won’t still be able to get the HI-4N ignition module. The HI-4N will be available under the S&S brand, along with many of the most popular products formerly offered in the Crane Cams […]

Dakota Digital 2014-Up Replacement Harley Touring Gauges Awarded Best New Powersports Product At SEMA

The Las Vegas SEMA Show has recently added a Powersports division to their showcase, designed to bring motorcycles and off-road vehicles to the event along with the manufacturers of related products.. One newly introduced product is chosen amongst each division to receive the highest award given: the SEMA Best New Product.  Dakota Digital is proud […]

Light Up Your Road Ahead. Far Ahead.

Headwinds, one of the leaders in custom headlights is introducing their newest hi-output Cree LED H4 headlight bulb for the FLTR Road Glide & FLHR Road King. Whiter & brighter than halogen, this 25W/50W high/low beam bulb is the color of the sun, 6,000° Kelvin with 1,800 Lumens. Easy to install, it replaces H4 lamps […]

The Johnny Five Dual-LED Tail Light

This CNC’s aluminum body construction tail light features ultra-bright dual 1” LED’s. The two-phase LEDs let you run both run and brake lights. Injection-molded polycarbonate lenses. Two threaded, 5/16″ holes on the back side make mounting to a fender, license plate bracket or sissy bar an easy task, while the wiring makes a clean exit […]

New Harley Touring Rear End Package Kit By Pickard USA

The newest custom saddlebags and rear fender package for Harley Davidson motorcycles and baggers are called The Swag Bags and are available now from Pickard USA. The Swag Bag Rear End Package is a kit consisting of stretched bags, side covers and a replacement rear fender with integrated license plate frame. These Harley saddlebags are […]

Single And Multi-Function Torpedo L.E.D. Lights

Küryakyn just released these all-new Torpedo L.E.D. Indicator and Run-Turn-Brake Lights for all universal 12v Applications. The streamlined torpedo-shaped housing measures in at 2.75 (L)” x 1.75” (D) (70mm x 45mm), and comes in two versions. Single-function amber versions are designed to serve as turn-signal indicators either up front or on the rear. Multi-function versions […]



S&S
S&S
S&S
Affliction

Subscribe

Socialize

Facebook Google+ Twitter