Spring Conversion Kit For Harley Models 1998-2016

barnettspringconversionkitKeeping lever effort to a minimum with a smoother, more progressive clutch engagement is what this Spring Conversion Kit is all about. It increases the capacity of the stock clutch with six coil springs replacing the stock diaphragm spring.  The low profile lock-up billet pressure plate is specifically designed to fit under the stock primary/derby cover.

Ideal for stock or big inch motors. It’s a simple bolt-on installation with no modifications required. Includes billet lock-up pressure plate and three sets of six coil springs (light, medium and heavy). Also included is a spacer for 1998-06 models or if needed to fit with an aftermarket primary cover. Fits 1998-16 Harley Davidson Big Twins (except 2013-16 CVO/SE and 2015-16 FLHTC “L” models) Available for cable or hydraulic clutch. MSRP $475.00. At Barnett Clutches And Cables.

Zipper's

3 Responses to “Spring Conversion Kit For Harley Models 1998-2016”


  1. 1 Calif phil Sep 26th, 2016 at 6:57 am

    Great products from a great company.

  2. 2 Doc Robinson Sep 26th, 2016 at 7:25 am

    I’m with Calif Phil. I visited the factory about 10 years back and was most impressed with what I saw. I have used Barnett products ever since and they have all worked great!

  3. 3 SYF Sep 26th, 2016 at 5:15 pm

    All 2016 Touring models have the thin primary cover that 2015 Low models had. So, unfortunately this won’t work on 2016 models.
    Please check with Barnett to verify.
    I Don’t want to be a know it all, but I’m trying to save some hassles.
    And I triple the above commenters. Barnett is an excellent company. I took their tour in 2001 (I believe) as well as worked down the street from them. Quite handy when you need a special cable.

Comments are currently closed.
S&S
S&S
S&S
Thrifty Rent-A-Car System, Inc.
Affliction Holdings, LLC

Socialize

Facebook Google+ Twitter