New High Tech Girder Front End

Which style of front end are you going to pick for your next custom? Glide, Hydraulic, Springer or Girder? The first 3 styles are so popular that they can get quite boring to the eye. Designed properly a Girder offers a interesting appearance and good performance. Depending of your project you can go vintage style  like the girders equipping the Indian motorcycles in the 30’s and 40’s and since then perfected many times by Earl and Paul Durfee. Or you can go the high tech style with offerings from a couple of companies, and now this new offering from RoosteR Custom Cycles.

For those who don’t know, in December 2009, RoosteR Custom Cycles acquired the intellectual property of Perse Performance front-end and aftermarket parts line, remanufacturing their products and creating new ones like this Girder. It is designed with the sport bike enthusiast in mind and is quite different from anything else on the market today. President Justin Rouse took his inspiration from the past but also from Indy Car racing suspensions to deliver added performance. An exposed dual A arm and coil-over shock provide a very mechanical look, while the solid aerodynamic “blades” combine function with top of the line style.

All billet parts are milled from solid 6061 T6 aircraft aluminum. Fits and tolerances are computer checked and measured to within thousandths of an inch. Only military specification stainless steel bearings are used. The Perse heritage is maintained with a left hand threaded hidden axle secured with the pinch locks. Three high performance suspension packages are available from RoosteR with all shocks manufactured to RoosteR specifications by Penske’s Racing Shock Division.

Finishes range from classic to extreme: Polished aluminum, Natural or ebony chrome, Anodized or Powder coating. Can be ordered with one or two brake caliper mounts that are ready to accept Brembo Radial Calipers available through RoosteR. Can be built to fit all makes and models with a V-Rod set up complete with headlight.

Info at: 509-244-3704 or visit RoosteR Custom Cycles

16 Responses to “New High Tech Girder Front End”


  1. 1 Seymour Jul 9th, 2010 at 7:46 am

    Sweet!

  2. 2 Joe Mielke Jul 9th, 2010 at 8:25 am
  3. 3 Sniperman Jul 9th, 2010 at 8:59 am

    This front end is a copy (at least the design) from a company called “RMA” Billet. They built this front end several years ago. Leo DiOrio was the engineer behind this design. If you look on the RMA website you will see the front end accordingly.

    To say that this a new product design is incorrect.

    On the other note, I’m hoping that it’s cheaper that the RMA model ($3,500) plus the finish.

  4. 4 raycwheeler@gmail.com Jul 9th, 2010 at 9:07 am

    Good job to AFT Jim and his beauties,

    need one of these for Bonneville attempts, nice rotor.

    ray usa

  5. 5 Jerry Jul 9th, 2010 at 9:14 am

    Sniperman. RMA Billet doesn’t exist! Where?

  6. 6 Shifter Jul 9th, 2010 at 9:18 am

    Sniperman. Give the proof of what you say. In addition your statement is incorrect. In the article Cyril “Or you can go the high tech style with offerings from a couple of companies, and now this new offering from RoosteR Custom Cycles”

  7. 7 Fluke Jul 9th, 2010 at 9:35 am

    RMD Billet, Yay Google

    but yeah, they seem very very similar and the Perse one featured is $6000, so not cheaper either.

  8. 8 Fluke Jul 9th, 2010 at 9:50 am

    It seems the AFT customs bike pictured above used a RMD front end, so perhaps the reason it looks like an RMD one is because it is one.

  9. 9 Shifter Jul 9th, 2010 at 9:50 am

    RMD Billet seems out of business. Is it possible that they sold some technology to RoosterR like Perse Performance did?

  10. 10 Crocker Mototcycle Co Jul 9th, 2010 at 10:54 am

    It’s actually a copy of vintage English design (1920’s) adapted by Indian and HD in the day (mid 1940″s) . Beautiful front end!

  11. 11 martin Twofeather Jul 9th, 2010 at 2:35 pm

    I think it’s a great job of style and looks,even tho it’s been around for a while,there is no reason not to make it better and bring it back again…………..

  12. 12 Bigal Jul 9th, 2010 at 7:05 pm

    He copied! He stole the Idea, He Designed it way back………..The Best Engneer/Designer/Inventor in the World is a “Sony Camera”. Get it! Nicelooking Front End, and if 2 guys are Mfg. the Girder, someone is probably making it for less. Great, cause $3500 sounds large. Real nice looking, anyway.

  13. 13 1550tc Jul 10th, 2010 at 3:03 am

    Leo DiOrio had this in Rodger Goldammer’s or in these RMA Billet guys from MN bothe in cincy back in 05-06?? and Rodger used it on one of his bikes.

    The Best Engneer/Designer/Inventor in the World is a “Sony Camera”or a fax before it lol

    NAH only thing original were adam and eve after them were all knock off’s

  14. 14 liuchuang Jul 14th, 2010 at 8:02 pm

    nice

  1. 1 Tweets that mention New High Tech Girder Front End at Cyril Huze Blog – Custom Motorcycle News -- Topsy.com Pingback on Jul 9th, 2010 at 8:03 am
  2. 2 New High Tech Girder Front End at Cyril Huze Blog – Custom … | Performance Struts And Suspension Pingback on Jul 9th, 2010 at 9:16 am
Comments are currently closed.
Cyril Huze